 | | RE: [Flashcoders] MX2004 component issues - Need to have discussi
on around th | RE: [Flashcoders] MX2004 component issues - Need to have discussi
on around th
2004-02-11 - By Sajid Saiyed
Back
Does your bindings work?
--sajid
-- --Original Message-- --
From: Phil Vessey [mailto:phil@(protected)]
Sent: Wednesday, February 11, 2004 7:30 PM
To: flashcoders@(protected)
Subject: Re: [Flashcoders] MX2004 component issues - Need to have
discussion around this
My components work fine inside movie clips on multiple frames throughout
my movie.
Sajid Saiyed wrote:
>MX2004 Component issues:
>
>I have been using MX2004 components and have been facing some problems
>consistently and have not found a way to overcome these.
>
>1. The components dont work if we place them in any frame other then
>frame-1.
>2. Even if we place them inside a movie clip and move that movie clip to a
>frame other then frame-1, they dont work.
>3. I applied the update available from the macromedia website and after
that
>software started behaving weirdly, it gave me errors inside a output window
>on lauch and some of the components didnt work while exporting.
>So i reinstalled the software again, without the update.
>
>All this restricts me to design very flat, static designs. Also if I have
to
>have multiple screens like, Login screen and when login is successful, i
>show the profile of the person, these kind of things i have to do with
>making the movieclips visible and invisible, which i think is a very bad
>solution. But there is no other way I can achieve this if i want to use
>MX2004 components.
>
>I know you would say use Forms, but that too is not a gr8 solution because
>it takes ages to publish and file size and performance time also increases
>
>I can not have tweenings, animations, frame transitions etc.
>
>Were the MX2004 components designed keeping the designers out of the
>picture?
>
>::::: Just wondering :::::
>
>--sajid
>
>=-- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- --
>Supported by Fig Leaf Software
>=-- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- --
>Be sure to check the archives and the wiki:
> http://chattyfig.figleaf.com/
>=-- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- --
>http://chattyfig.figleaf.com/cgi-bin/ezmlm-cgi?1:mss:103782
>=-- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- --
>To unsubscribe send a blank e-mail to:
>Normal Mode: flashcoders-unsubscribe@(protected)
>Digest Mode: flashcoders-digest-unsubscrive@(protected)
>
>
>
>
>
>
=-- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- --
Supported by Fig Leaf Software
=-- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- --
Be sure to check the archives and the wiki:
http://chattyfig.figleaf.com/
=-- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- --
http://chattyfig.figleaf.com/cgi-bin/ezmlm-cgi?1:mss:103790
=-- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- --
To unsubscribe send a blank e-mail to:
Normal Mode: flashcoders-unsubscribe@(protected)
Digest Mode: flashcoders-digest-unsubscrive@(protected)
=-- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- --
Supported by Fig Leaf Software
=-- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- --
Be sure to check the archives and the wiki:
http://chattyfig.figleaf.com/
=-- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- --
http://chattyfig.figleaf.com/cgi-bin/ezmlm-cgi?1:mss:103793
=-- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- --
To unsubscribe send a blank e-mail to:
Normal Mode: flashcoders-unsubscribe@(protected)
Digest Mode: flashcoders-digest-unsubscrive@(protected)
|
|
|