Links to Free Samples Enclosed! [ was "... / Ironwork Style Design Sof 2006-07-09 - By ccoles_avengers
Back
Hi Elena, Doug,
Thanks again for the Dover Art book sugggestion! I went to B&N and
although they did not have the ironwork books available at the time, I
did pick up the following which had some ironworks type images:
Pictorial Archive of Printer's Ornaments from the Renaissance to 20th
Century
1489 Designs
Selected by Carol Belanger Grafton
Dover Publications
ISBN - 0-486-23944-6
$12.95
However, they actually DO have a group of ironworks books that I can
order, so I will be seeing about those as well -
<http://store.doverpublications.com/0486443620.html>
FYI, they also have free clipart, and a free clip art of the week
available as well -
<http://www.doverpublications.com/ca/samples.html>. So this is
definitely a gold mine. :) [Time to point my web whacker program
towards that site for an automatic download. ;) ]
So thanks again for the suggestion!
Cheers.
Claudia
"Selocic"
- 3D: when 'Flat' just isn't good enough! -
--- In Carrara@(protected), "ccoles_avengers" <ccoles_shado@(protected)>
wrote:
>
> Okay, thanks Elena for the tip on the Dover art books. I do have a
> B+N nearby as well as a used books store so that may also be a
possiblity.
>
> Again, thanks. :)
>
> Claudia
> "Selocic"
> - 3D: when 'Flat' just isn't good
> enough! -
>
>
> --- In Carrara@(protected), "Elena Dent" <debadger@> wrote:
> >
> > Try your local book store, either Barnes and Nobel or if you have
a used
> > book store with a large art section even better. It's not free, but
> there
> > are Dover clipart books that have stuff like that. The Dover books
> new are,
> > I think, around $10 and have a CD of the printed art. If you can
> find them
> > used they won't have the disk but ought to be even cheaper and all
> you need
> > to do is scan in the graphics.
> >
> > Elena
> >
> > -- --Original Message-- --
> > From: Carrara@(protected) [mailto:Carrara@(protected)]On
Behalf
> > Of ccoles_avengers
> > Sent: Wednesday, July 05, 2006 1:42 AM
> > To: Carrara@(protected)
> > Subject: [Carrara] Help Needed In Finding Filigree / Ironwork Style
> > Design Software?
> >
> >
> > Hi,
> >
> > I am looking for some freeware/software that can help me design
> > filigree style designs, like those found on iron works -
> > <http://www.cactuspunch.com/store.php?pid=collection&pack_num=des05>.
> > Does anyone have any tips on software, tutorials, or any other method
> > for creating these designs *8easily*? All recommendations welcomed.
> >
> > Thanks.
> >
> > Claudia
> > "Selocic"
> > - 3D: when 'Flat' just isn't good enough! -
> >
> >
> >
> >
> >
> >
> >
> >
> > Welcome Yahoo Members!
> >
> > http://www.eovia.com
> > Yahoo! Groups Links
> >
>
-- ---- ---- ---- ------ Yahoo! Groups Sponsor -- ---- ---- ---- --~-->
See what's inside the new Yahoo! Groups email.
http://us.click.yahoo.com/2pRQfA/bOaOAA/yQLSAA/_iFolB/TM
-- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- -----~->
Welcome Yahoo Members!
http://www.eovia.com
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Carrara/
<*> To unsubscribe from this group, send an email to:
Carrara-unsubscribe@(protected)
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|
|
