 | | | Flash Pro | | Hello!
Do check the website of the week by visiting
http //newwebsitepick.info .
The website also says how you can nomiate your website
if you have one.
Regards
Kathy
I was playing with the symetric modeling in Hex. I noticed that sometimes the moves were
not reflected. If I adjust a vertex or a face by typing in a position numerically the opposite
facet does noHi
Carrara 5 Pro also support SynthEyes for $399.
http //www.ssontech.com/
It is use in the movie industry has features that even the big
expensive guys don 't have.
I have it and will be using with
In a message dated 11/7/2005 11 58 49 PM Pacific Standard Time
hyperdon@(protected) writes
Does anyone know where I might find Eovia 's Transposer? I need the
version that works with StudioHi Michael
I never tried booleaning in the VM because I always had a difficult
time getting it to work. But it is good to see that someone uses it
and I 'll check out this method the next time I neeThanks to Arnaud who pointed out that I had included the WRONG file
in the zip the issue should be resolved. The correct files are now
up on the website.
http //www.des-web.net/html/beta.html
SoHey thanks Wayne I found that very helpful!
--- In Carrara@(protected) "whkguamusa " <guamauto@(protected) > wrote
>
> This might be worth the download.
> page
> http //www.jefflew.com/DVD_content.This might be worth the download.
page
http //www.jefflew.com/DVD_content.html
direct link to the movie file
http //www.jefflewproductions.com/movies/Learning3Danimation_Free34min.m
ov
I have theHi
For those of you who want to see a video of a modeling in Hexagon and
some edits in Zbrush you can take a look at my last demo (not a tutorial)
23 Min of videos for 1h38min of Hexagon and 50minCarrara doesn 't support a scripting language yet. At least it
hasn 't supported it in C4P nor in the C5 Beta. It 's been on a number
of our wishlists...
Eovia does support their software and is readI did not think Carrara was on the Permissible List of mentionable apps
at cgtalk since they seem to be limited to what the Television and
Motion Picture production industry uses.
As to number 1 This seems interesteing Brian. Could you pelase keep us posted?
Thanks.
Claudia
"Selocic "
- 3D when 'Flat ' just isn 't good enough! -
--- In Carrara@(protected) "Brian Hinton " <brian@(protected) > wI 've been playing with SSS and it seems to be working pretty well but
I cannot seem to get light to actually transmit -through- the object.
One way I thought might work (if it isn 't built-in somehoHi all-
Yes there appears to be an issue with the CS5 beta- it works ok for
the beta tester build (the only one I currently have) but not for the
released beta version. I am in discussions trying Hi Philip
Persoanlly I think some of his stuff should also be up on the Eovia
site as well to help illustrate how CS can be used in video
applications [...a topic that seems sparse as far as samplesHi Mike
Will your book cover the new particle engine?
-Steven
--- In Carrara@(protected) "MD " <mike_delaflor@(protected) > wrote
>
> Greetings
>
> I am looking for images for figures in the new C5Brian that looks promising but I 'm always a skeptic when it comes to free
stuff and maybe that 's just from old physics classes. Aside from not being
able to save as .obj yet how is it the "pinnacle Hi Doug
Thanks for the tip. I downloaded it and will check it out. This may
save me $50 from having to get the full version of CutePDF. )
Cheers.
Claudia
"Selocic "
- 3D when 'Flat ' just isn 't Question
how can people submit images for the book when CS 5 has yet to be released ?
hi people
After reading this i had idea and to my delight found a solution for CS pro4 to my multicut / substract problem.
I don 't know if this will work with other shapes - re cutting holes in hi
In C5 can you open up a group of a native Poser file in the VM and
use the morph tool to blend stacked morph targets using the smoothed
shape?
As some of you know when you "stack " morph targesHi Doug
You 're welcome. ) And don 't forget to check out the method I shared
with Eric in a previous post when you get the chance.
<http //groups.yahoo.com/group/Carrara/message/62604 >
Also ifSince this started in Carrara forum replying here but will post to
Hexagon forum too.
Claudia suggested using "bridge " tool to cut a hole in an object. I
tried it and its very easy...select non-adjHmmm having trouble imagining cutting a hole using bridge tool....maybe
from one side thru inside to other side?......but after I send this email
I 'm switching to my other PC and will give it a try.
I am quite sure the render size is 16 000 x 16 000. I know I have rendered
images 12 000 pixels wide before
Mike
----- Original Message -----
From "Chris Dordoni " <dordoni@(protected) >
To <Carrara
On Nov 5 2005 at 6 21 PM Patrick Tuten wrote
> C4Pro with Amapi is a really good combo for the money. I don 't know
> how familar you are with Amapi some people don 't care for it. I
> personallI 've just found that adding a torque force and then removing it seems
to alter the calculated impact points of other objects in the scene.
Andrew
Does anyone know what the rendering limits are in C5 and if the DPI
can be specified?
Thanks
Chris
A while back I asked the list a question on HDR images....because Carrara
help file wasn 't clear enough.
and silly me there is an HDR tut in 3dXtract Aug 2004 that explained things
clearly.
Just haveHello Carrara Gurus
I am thinking about upgrading to Carrara Pro 4 from Studio 3. I have
read as much as I could from Eovia 's site as well as reviews from
several sources which may or may not kno |
|
|
